{"product_id":"multipoint-gearbox-lift-lever","title":"Multipoint Gearbox - Lift Lever","description":"\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApeer gearboxes are designed for durability and functionality, available in two backset sizes: 35mm and 45mm, featuring a single spindle mechanism.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Spindle Mechanism:\u003c\/strong\u003e Sprung single spindles are specifically designed for lift lever functions only.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Each gearbox measures 228mm in height, with an additional 15mm added to the backset. The latch and deadbolt both measure 30mm in height, with a 65mm distance between the bottom of the latch and the top of the deadbolt.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFaceplate Compatibility:\u003c\/strong\u003e Gearboxes are equipped with faceplates that include three screw holes. The distance from the top to the middle screw hole is 109mm, and the distance from the middle to the bottom screw hole is also 109mm.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHistorical Note:\u003c\/strong\u003e Earlier models featured a small spindle hole located at the top of the case, adjacent to the latch, which was utilized to hold the latch back.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOperation: Lift Lever\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLatch Reversal:\u003c\/strong\u003e To reverse the latch, simply undo the screw, remove the latch, reverse it, and reinsert before replacing the screw.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLocking the Door:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eLift the handle upwards to engage the locking points.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSecure the locking points and the main deadbolt (if applicable) by turning the key.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eUnlocking the Door:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eUnlock the system by turning the key.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePush the handle downwards to disengage the locking points and retract the latch.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTo measure the backset, follow these steps:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIdentify the Door Edge\u003c\/strong\u003e: Place your measuring tape or ruler against the edge of the door where the lock will be installed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLocate the Center of the Lock\u003c\/strong\u003e: Measure from the edge of the door to the center of the lock cylinder or the hole where the latch will be installed. This distance is your backset.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCheck for Standard Sizes\u003c\/strong\u003e: Common backset sizes are typically 35mm or 45mm. Ensure your measurement aligns with these standards.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTo measure the centres (PZ), do the following:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFind the Lock Cylinder\u003c\/strong\u003e: Identify the position of the lock cylinder on the door.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMeasure from the Center of the Cylinder to the Center of the Latch\u003c\/strong\u003e: Use a ruler to measure the distance from the center of the lock cylinder to the center of the latch or deadbolt. This measurement should be 92mm for your specification.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eRegarding the operation of the lift lever:\u003c\/p\u003e\n\u003cp\u003eThe lift lever operation involves lifting the handle upwards to engage the locking mechanism. This action activates the latch and deadbolt, securing the door. To unlock, simply turn the key and push the handle downwards to retract the latch.\u003c\/p\u003e\n\u003cp\u003eIf you have any further questions or need additional details, feel free to ask!\u003c\/p\u003e\n\u003cp\u003eTo measure the backset and centres for your Apeer gearboxes, follow these guidelines:\u003c\/p\u003e\n\u003ch3\u003eMeasuring the Backset\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIdentify the Door Edge\u003c\/strong\u003e: Position your measuring tape or ruler against the edge of the door where the lock will be installed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLocate the Center of the Lock\u003c\/strong\u003e: Measure from the edge of the door to the center of the lock cylinder or the hole where the latch will be installed. This distance is your backset.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCheck for Standard Sizes\u003c\/strong\u003e: Common backset sizes are typically 35mm or 45mm. Ensure your measurement aligns with these standards.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eMeasuring the Centres (PZ)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFind the Lock Cylinder\u003c\/strong\u003e: Identify the position of the lock cylinder on the door.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMeasure from the Center of the Cylinder to the Center of the Latch\u003c\/strong\u003e: Use a ruler to measure the distance from the center of the lock cylinder to the center of the latch or deadbolt. This measurement should be 92mm for your specification.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eOperation of the Lift Lever\u003c\/h3\u003e\n\u003cp\u003eThe lift lever operation involves lifting the handle upwards to engage the locking mechanism. This action activates the latch and deadbolt, securing the door. To unlock, simply turn the key and push the handle downwards to retract the latch.\u003c\/p\u003e\n\u003cp\u003eIf you have any further questions or need additional details, feel free to ask!\u003c\/p\u003e\n\u003cp\u003eTo measure the backset and centres for your Apeer gearboxes, follow these guidelines:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMeasuring the Backset\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIdentify the Door Edge:\u003c\/strong\u003e Position your measuring tape or ruler against the edge of the door where the lock will be installed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLocate the Center of the Lock:\u003c\/strong\u003e Measure from the edge of the door to the center of the lock cylinder or the hole where the latch will be installed. This distance is your backset.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCheck for Standard Sizes:\u003c\/strong\u003e Common backset sizes are typically 35mm or 45mm. Ensure your measurement aligns with these standards.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eMeasuring the Centres (PZ)\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFind the Lock Cylinder:\u003c\/strong\u003e Identify the position of the lock cylinder on the door.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMeasure from the Center of the Cylinder to the Center of the Latch:\u003c\/strong\u003e Use a ruler to measure the distance from the center of the lock cylinder to the center of the latch or deadbolt. This measurement should be 92mm for your specification.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eOperation of the Lift Lever\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lift lever operation involves lifting the handle upwards to engage the locking mechanism. This action activates the latch and deadbolt, securing the door. To unlock, simply turn the key and push the handle downwards to retract the latch.\u003c\/p\u003e\n\u003cp\u003eIf you have any further questions or need additional details, feel free to ask!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Apeer","offers":[{"title":"35mm \/ Single 8mm \/ 92mm","offer_id":53708816122194,"sku":"APGBOX35S-UDF","price":82.25,"currency_code":"GBP","in_stock":true},{"title":"45mm \/ Single 8mm \/ 92mm","offer_id":53708816154962,"sku":"APGBOX45S-UDF","price":82.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1081\/7994\/7858\/files\/ANGCASE35_1_2.avif?v=1781092219","url":"https:\/\/upvcfittings.co.uk\/products\/multipoint-gearbox-lift-lever","provider":"My Store","version":"1.0","type":"link"}