{"product_id":"genuine-multipoint-gearbox-lift-lever-2","title":"Genuine Multipoint Gearbox - Lift Lever","description":"\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKFV cases are riveted onto strips and require drilling and re-riveting for installation. These cases are designed to replace only newer KFV locks, as older versions feature different connectors.\u003c\/p\u003e\n\u003cp\u003eKFV multipoint door lock gearboxes are single spindle with 92mm centers.\u003c\/p\u003e\n\u003cp\u003eThe overall height of the gearbox is 210mm, with a bolt throw of 21mm. The distance from the bottom of the latch to the top of the deadbolt measures 56mm, and the distance from the spindle to the top of the case is 85mm. The gearbox is equipped with both a hole and a groove to accommodate bolt-through handle fixings.\u003c\/p\u003e\n\u003cp\u003eOlder KFV gearboxes connect to the faceplate strip using 1\/8\" rivets. Few other gearboxes utilize this method (Winkhaus being another example), which can assist in identification. In contrast, newer KFV locks feature gearboxes that are screwed to the faceplate.\u003c\/p\u003e\n\u003cp\u003eKFV locks are available in both lift lever and key wind variants. It is important to note that a lift lever lock cannot be swapped with a key wind gearbox, and vice versa.\u003c\/p\u003e\n\u003cp\u003eWhen measuring the backset, remember to allow 2-3mm for the faceplate. For instance, a 35mm backset gearbox will measure 32mm when not fixed to the strip.\u003c\/p\u003e\n\u003cp\u003eEarly KFV models had different rivet spacing and utilized different connectors for attaching the gearbox to the strip. This is not an issue when replacing the entire lock, but it is crucial to consider if only the gearbox needs replacement, as the new gearbox will not fit very early models. Brand new locks feature a gearbox attached to the faceplate with screws.\u003c\/p\u003e\n\u003cp\u003eWe offer a variety of associated products for KFV lever gearboxes, including multipoint door locks, keeps, spindles, handles, and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo Lock the Door\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eLift the handle upwards to engage the locking points.\u003c\/li\u003e\n\u003cli\u003eLock the locking points and main deadbolt (if present) by turning the key.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTo Unlock the Door\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUnlock the system by turning the key.\u003c\/li\u003e\n\u003cli\u003ePush the handle downwards to disengage the locking points and retract the latch.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eOperation: Lift Lever\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLatch Reversal:\u003c\/strong\u003e Depending on the date of manufacture, either:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePush in the latch and undo the screw in the back of the lock case, remove the latch, reverse it, and reinsert.\u003c\/li\u003e\n\u003cli\u003ePush in the latch and undo the screw in the side of the lock case to remove the latch, reverse it, and reinsert.\u003c\/li\u003e\n\u003cli\u003ePull down the serrated button at the rear of the case while simultaneously pulling out and reversing the latch. Note that the serrated buttons may be secured by a tiny travel pin, requiring you to push down hard with a screwdriver to break the pin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Specification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e KFV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackset:\u003c\/strong\u003e 25mm, 30mm, 35mm, 40mm, or 45mm - \u003cem\u003eHow do I measure the backset?\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentres PZ:\u003c\/strong\u003e 92mm - \u003cem\u003eHow do I measure the centres?\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Height:\u003c\/strong\u003e 210mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Width:\u003c\/strong\u003e Backset + 14mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopy\/Genuine:\u003c\/strong\u003e Genuine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder Type:\u003c\/strong\u003e Euro\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHanding:\u003c\/strong\u003e Not Handed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain Gearbox:\u003c\/strong\u003e Latch \u0026amp; deadbolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle:\u003c\/strong\u003e Single 8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Lift Lever - \u003cem\u003eWhat is the operation?\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Supplied in singles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KFV","offers":[{"title":"25mm","offer_id":54481584193874,"sku":"KFVCASE25-UDF","price":145.67,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54481584226642,"sku":"KFVCASE30-UDF","price":124.7,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":54481584259410,"sku":"KFVCASE40-UDF","price":129.33,"currency_code":"GBP","in_stock":true},{"title":"45mm","offer_id":54481584292178,"sku":"KFVCASE45-UDF","price":135.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1081\/7994\/7858\/files\/KFVCASE25_1_1_10829d0c-a3c9-428e-ae7e-f6af7fc5ede2.avif?v=1788250095","url":"https:\/\/upvcfittings.co.uk\/products\/genuine-multipoint-gearbox-lift-lever-2","provider":"UPVC Fittings","version":"1.0","type":"link"}